第九屆國際應用激光技術中國研討會

9th International Laser Processing and Systems Conference (LPC 2014)

2014年3月18-20日，上海新國際博覽中心

March 18-20, 2014. Shanghai New International Expo Centre

地點：March 18, 2014 喜馬拉雅酒店6樓會議室/ Venue: Jumeirah Hotel 6th Floor

地點：March 19, 2014  E2-M17\18會議室/ Venue: Conference Room E2-M17\M18

大會主席：王又良 研究員，Reinhart Poprawe 教授

Conference Chairman: Prof. Youliang Wang, Prof. Reinhart Poprawe

大會執行主席：顧 波 教授 ，肖榮詩 教授， 陸永楓 教授

Conference Executive Chairman:   Prof. Bo Gu, Prof. Rongshi Xiao, Prof. Yongfeng Lu

時間
Time

報告題目
Topic

報告人
Speaker

2014年3月18日/ March 18th, 2014

LPC Conference Plenary Session (大會主題演講)
Venue: Jumeirah Hotel 6th Floor 地點： 喜馬拉雅酒店6樓會議室

主持人：顧波 教授／ 肖榮詩教授
Chaired by: Prof. Bo Gu ／ Prof. Rongshi Xiao

注冊報到
Registration

13:30-14:00

開幕式
Opening Ceremony

13:30-13:35

慕尼黑展覽歡迎致辭                                MMI Welcome remarks                            

Dr Martin Lechner,Executive Director, 慕尼黑國際博覽集團                           Dr Martin Lechner, Executive Director, MMI Group

13:35-13:40

美國激光學會歡迎致辭                             LIA Welcome remarks                                                    

Jim Naugle, Director , 美國激光學會                                                   Jim Naugle, Director, Laser Institute of America

13:40-13:45

大會主席歡迎致辭                                      Conference Chair welcome remarks     

Reinhart Poprawe教授，弗勞恩霍夫協會激光研究所亞琛工業大學激光所，所長；
Prof. Reinhart Poprawe, Director, Fraunhofer ILT, LLT RWTH-Aachen University.

13:45-14:00

大會主席歡迎致辭及中國激光產業總結                                                        Conference Chair welcome remarks and brief summary on Chinese laser industry             

王又良 研究員，中國光學學會激光加工專業委員會，主任委員；
Prof. Youliang Wang, Chinese Optical Society - Laser Processing Committee

14:00-17:15

LPC Conference Plenary Session (大會主題演講) -- 地點:喜馬拉雅酒店6樓會議室/Jumeirah Hotel 6th Floor

主持人：    顧波 教授／ 肖榮詩教授
Chaired by: Prof. Bo Gu   /Prof. Rongshi Xiao                                                                                                                                                        

14:00-14:40

中國再制造工程研究及其產業化發展 Researches and Industrialization of Remanufacture Engineering in China

Prof. Binshi Xu, Academician of CAD, Member of PAS                                             
徐濱士，中國工程院院士，波蘭科學院外籍院士               

14:40-15:20

激光：?jiǎn)⒂觅Y源高效能利用產品的使能工具
The Laser: The Enabling Tool for Resource Efficient Products

Klaus Loeffler，通快激光和系統技術有限公司，全球銷售總監                                                                           Klaus Loeffler, TRUMPF Laser- und Systemtechnik GmbH, Germany

15:20-16:00

工業激光器在全球市場的機遇              Opportunities for Industrial Lasers in the Global Market

David A. Belforte，《工業激光解決方案》主編
David A. Belforte, Editor in Chief, Industrial Laser Solutions, USA

16:00-16:10

茶歇/ Coffee Break

16:10-16:50

高性能激光器在金屬構件增材制造中的應用
High Performance Laser Additive Manufacturing of Metal Components

黃衛東教授，西北工業大學Prof. Weidong Huang, Northwestern Polytechnic University, China

16:50-17:30

增材制造：通用公司的生產型轉變
Additive Manufacturing: The Transition to Production within GE

James W. Sears 博士，通用全球研發中心，美國        Dr. James W. Sears, GE Global Research, USA

2014年3月19日/ March 19th, 2014 分會場 1 /Conference 1

主題：微納米技術與超快激光精密加工
Topic: Ultrafast Laser Precision Machining and Nano Technology
地點：E2-M17\18會議室/ Venue: Conference Room E2-M17\M18

主持人： 周明教授 ／Thomas Harrer 博士
Chaired by: Prof. Zhou Ming/Dr. Thomas Harrer

09:30-09:45

超短脈沖激光器在精密工業加工中的應用Application of ultra-short pulse lasers for industrial micro-machining   

Victor Matylitsky, 博士， High Q Laser, 奧地利 Dr. Victor Matylitsky, High Q Laser, Austria                                             

9:45-10:15

超高重復頻率鎖模光纖激光器及其應用    High repetition mode-locked fiber laser and its applications

張志剛教授, 北京大學信息學院量子電子學研究所                          Prof.Zhigang Zhang,Institute of quantum electronics, Information institute, Peking University，China

10:15-10:45

超快激光技術的最新趨勢與應用
Ultrafast laser technology: Newest Trends and Applications             
                        

Thomas Harrer 博士，通快激光和系統技術有限公司                       Dr. Thomas Harrer, TRUMPF Laser- und Systemtechnik GmbH, Germany

10:45-11:15

激光技術在關鍵性部件制造及新能源領域的應用                                                       Laser application for manufacturing key structures inaviation and novel energy field        

周明教授，機械工程學教授，清華大學                                     Zhou Ming,Professor of Dept. of Mechanical Engineering, Tsinghua University 

11:15-11:45

超快激光加工技術的最新應用及未來挑戰Latest Development and Future Challenges of Ultrafast Laser Machining and Applications                                                                                          

Magnus Bengtsson, 美國相干公司                                    Magnus Bengtsson, Coherent USA                              

11:45-12:05

 高功率高能量飛秒放大器的工業應用            High power and high energy femtosecond amplifiers for industrial applications  

Y. Zaouter , Amplitude系統 ， 法國                                                      Y. Zaouter , Amplitude Systemes , France                                      

2014年3月19日/ March 19th, 2014 分會場 2/ Conference 2

主題：新型控制技術和系統在激光微加工中的應用
Topic: Micro-machining and New Control Systems
地點：E2-M17\18會議室/ Venue: Conference Room E2-M17\M18

主持人：張海斌博士／張杰博士
Chaired by:Dr. Haibin Zhang/Dr. Jie Zhang

13:30-13:50

高功率納秒激光器在移動設備制造上的應用High Power Nanosecond Laser for Mobile Device Manufacturing                               

Rajesh S Patel博士， 光譜物理，美國 Dr.Rajesh S Patel,Spectra-Physics, USA

13:50-14:20

激光隱形切割的原則                              Principle of the Stealth Dicing

Etsuji Ohmura 教授，大阪大學，日本                                           Prof.Etsuji Ohmura, Osaka University, Japan

14:20-14:50

高速高精度電流激光掃描儀                                     High Speed and High Precision Galvanometer-based Laser Scanners

Yi Qian, Cambridge Technology Inc., 美國                                                            Yi Qian, CTI, USA

14:50-15:10

精高亮度光纖耦合半導體激光器光源的技術與應用                             High brightness fiber coupled diode lasers

Jens Biesenbach博士 ,德國帝納斯半導體激光有限公司
Dr. Jens Biesenbach ,DILAS Diodenlaser GmbH,Germany

15:10-15:25

茶歇/ Coffee Break

15:25-15:50

激光薄膜加工解決方案
Solution-based laser processing of thin film

張杰 博士，Advanced Optowave，美國                   Dr.Jie Zhang, Advanced Optowave Corp., USA

15:50-16:20

采用激光全息投影的“綠色”光刻技術                 Laser Holographic Projection for ‘Green’ Photolithography

Bill Parker 博士,Creative Microsystems, 美國                                         Dr.Bill Parker,Creative Microsystems, USA

16:20-16:45

Applications of Laser-Induced Plasma in Miro/Nanoscale Material Processing

Dongsik Kim 教授, POSTECH, 韓國Prof. Dongsik Kim,POSTECH, Republic of Korea

16:45-17:10

Laser Micro-Machining Systems for Consumer Electronics

Haibin Zhang 博士, Electro Scientific Industries, 美國 Dr. Haibin Zhang , Electro Scientific Industries, USA

2014年3月19日/ March 19th, 2014 分會場 3/Conference 3

主題：增材制造與激光3D打印
Topic: Additive Manufacturing/3D Printing
地點：E2-M17\18會議室/ Venue: Conference Room E2-M17\M18

主持人： 楊永強教授/David Yang教授
Chaired by: Prof. Yongqiang Yang /Prof. David Yang

09:30-09:55

激光再制造鑄鐵件氣孔缺陷及其控制措施      Pore Defects Formed in the Laser Remanufactured Grey Cast Iron Parts and Their Controlling Measures

董世運博士，裝備再制造技術國家級重點實驗室                Dr.Shiyun Dong, National Key Laboratory for Remanufactturing,China

09:55-10:20

數字化醫療3D打印技術                                3D Printing Technology for Digital Health

陳繼民教授，北京工業大學                                                  Prof.Jimin Chen，Beijing University of Technology, China

 10:20-10:45

制造改變?cè)O(shè)計-金屬部件選擇性激光熔化直接制造的發展與前景                                                    Manufacturing Changes Design--Progress and prospect on direct manufacturing of metal parts by Selective Laser Melting

楊永強教授，華南理工大學                                     Prof. Yongqiang Yang，South China University of Technology,China

10:45-11:10

鋁合金的選擇性激光熔化技術                  Selective laser melting of aluminium-based alloys

Jonathan Blackburn博士， TWI, 英國 Dr. Jonathan Blackburn， TWI, United Kingdom

11:10-11:35

激光加工在汽車工業的應用及挑戰
Application and challenge of laser materials processing in the automotive industry

David Yang 教授， 華中科技大學/美國通用汽車                            David Yang，Huazhong Univeristy of Science and Technology &GM China

11:35-11:55

激光藍寶石切割 Laser sapphire cutting

楊勇 先生， 德商羅芬激光技術(上海)有限公司 Mr. Yang Yong, Rofin-Baasel China Co., Ltd

11:55-12:15

用于高功率和高能量激光器的激光玻璃-源自肖特的激光材料 Laser Glass for High powder/high energy Lasers -Laser materials from SCHOTT

張廣軍 博士，育特玻璃科技(蘇州) Dr. Zhang Guangjun,                                                                SCHOTT Glass Technologies (Suzhou)

2014年3月19日/ March 19th, 2014 分會場4/Conference 4

主題：先進激光光源與應用
Topic: Advanced Laser Sources and Applications
地點：E2-M17\18會議室/ Venue: Conference Room E2-M17\M18

主持人： 陳繼民教授 ／Dr.Jing Zhang
Chaired by: Prof.Jimin Chen ／Dr.Jing Zhang

13:30-13:55

2微米光纖調Q激光器在材料加工上的應用
 2 Micron Q-Switched Fiber Lasers for Materials Processing

Shibin Jiang教授，AdValue光電公司，美國                                     Prof. Shibin Jiang, AdValue Photonics, USA

13:55-14:20

光纖激光器對銅，黃銅等高反材料的切割    Fiber Laser Cutting of Metals Including High Reflective Materials like Copper and Brass

Klaus Kleine博士， 美國相干公司                                                  Dr. Klaus Kleine, Coherent, USA

14:20-14:45

高功率摻銩硅光纖激光器研究進展         Research Progress and Application of High Power Tm-Doped Fiber Lasers

王璞教授, 北京工業大學                                                                Prof.Pu Wang, Beijing University of Technology ,China                                                   

14:45-15:10

大功率射頻板條CO₂激光器關鍵技術研究及應用 激光器 Study of key techniques of high power RF excited slab CO2 laser and its applications                      

唐霞輝教授，華中科技大學 Prof.Tang Xiahui, Huazhong University of Science and Technology, China

15:10-15:25

茶歇/ Coffee Break

15:25-15:45

高亮度半導體激光在薄板切割中的應用Application of High brightness semiconductor in the use of Sheet cutting

王穎 紐敦光電科技（上海）有限公司                         Ying Wang, OPPTON, China

15:45-16:05

復合材料與金屬注入技術的進展                  Progress in joining technology of composite and metal

Dr.Jing Zhang,通用全球研發中心，中國                                                        Dr.Jing Zhang,China Science Lab, GM Global Research & Development, China              

16:05-16:25

激光原位沉積金屬基復合材料及其梯度涂層                  Laser in-situ deposition of metal matrix composites and their gradient coatings

梁京教授, 東北大學材料各向異性與織構教育部重點實驗室                      Prof. Liang Jin, ATM Lab, Northeastern University, China

16:25-16:45

大厚度鋁合金板板材激光噴丸成形工藝研究   laser peen forming of thick aluminum alloy with and withiout pre-bending                    

胡永祥教授， 上海交通大學                                                     Prof. Yongxiang Hu, Shanghai Jiao Tong University ,China                        

16:45-17:05

汽車白車身落水槽激光復合焊與釬焊的對比         The Comparison of Laser Hybrid Welding and Laser Brazing of Water Drainer Channel in Auto Body-in-White

姜濤，廣州明珞汽車裝備有限公司                                       Tao Jiang, Guangzhou Mino Automotive Equipment Co., Ltd.

2014年3月20日/ March 20th, 2014

參觀慕尼黑光博會 Visit LASER World of PHOTONICS CHINA