蘇州大學激光加工中心 江蘇 蘇州 215021

1 引言

1.1 復合焊的優點

激光具有高亮度、高方向性、高單色性、高相干性及特殊的空間分布特性等優點，可獲得高達10¹¹W/cm²的聚焦功率密度，其巨大的能量集中在非常小的范圍內，能迅速將材料局部升溫至極高的溫度，并能以較高的冷卻速度進行冷卻，因此激光加工技術已成為一種無與倫比的材料加工方法^[1]。激光材料加工技術在工業領域應用的廣泛程度，已然成為衡量一個國家工業水平高低的重要標志。激光焊接技術與傳統焊接技術相比，具有焊縫深寬比高、熱影響區窄、焊接接頭質量佳、生產效率高等突出優點，因此逐漸得到科研人員及企業的關注。常見的激光焊接技術包含單純激光焊接、激光填絲焊接和激光-電弧復合焊接（Hybrid Laser Arc Welding）。由于激光和熔化極氣體保護焊（Gas metal Arc Welding, GMAW）能加速焊接工藝，降低成本，并提高焊接質量。所以激光焊接和復合焊在汽車制造、航空航天領域中已經得到了廣泛的應用。但在造船行業中應用還不是很普遍，尤其是在中國的造船上，還在大量的使用人力進行焊接，不僅污染環境、而且勞動強度大、危害比較大、精度和效率也無法保證。

激光復合焊結合了激光焊和MAG焊或其它氣體保護焊兩種技術的優勢。復合焊主要的優點是：焊接穿透的深度深而且焊道窄，焊接速度快，熱輸入低，熱影響區小，熱變形??；焊縫質量高，外觀佳，物理性能好，返工率低，焊縫底部控制好，可實現單面焊雙面成形。并且確保了焊縫的金屬結構與機械屬性。

閱讀全文，點擊鏈接：http://www.nonstopmall-jo.com/newebook/201611/index.php#page/3

參考文獻

[1]    Liu Shunhong. Laser Manufacturing Technology[M]. Wuhan: Huazhong University of Science and Technology Press, 2011, 1~4.

    劉順洪. 激光制造技術[M]. 武漢：華中科技大學出版社, 2011, 1~4.

[2]    W. Xu, D. Westerbaan, S.S. Nayak, et al.. Tensile and fatigue properties of fiber laser welded high strength low alloy and DP980 dual-phase steel joints [J]. Materials and Design, 2013, 43: 373~383.

[3]          W. M. Steen. Arc augmented laser processing of materials [J], Journal of Applied Physics, 1980, 51(11): 5636~5641.

[4]    Xiao Rongshi, Wu Shikai. Progress on Laser-arc hybrid welding[J], Chinese Journal of Lasers, 2008, 35(11): 1680~1685.

    肖榮詩, 吳世凱. 激光-電弧復合焊接的研究進展[J], 中國激光, 2008, 35(11): 1680~1685.

[5]    Ji Yipeng, Chen Jiaqing, Jiao Xiangdong, et al.. Laser-arc hybrid welding technology[J], Welding Technology, 2009, 38(12): 1~7.

    姬宜朋, 陳家慶, 焦向東等. 激光-電弧復合熱源焊接技術[J], 焊接技術, 2009, 38(12): 1~7.

[6]    Cui Li, Zhang Yanchao, He Dingyong, et al.. Research progress of high power fiber laser welding[J], Laser Technology, 2012, 36(2): 154~159.

    崔麗，張彥超，賀定勇等.高功率光纖激光焊接的研究進展[J], 激光技術, 2012, 36(2): 154~159.

[7]    X.N. Wang, L.X. Du, H.S. Di, et al.. Effect of deformation on continuous cooling phase transformation behaviors of 780MPa Nb-Ti ultra-high strength steel[J], Steel Research International, 2012, 82(12): 1417~1424.

[8]    Song Yongjun, Wang Xiaonan, Xu Zhaoguo, et al.. Development of 700MPa grade ultra-high strength heavy duty automobile carriage strip[J], Journal of Mechanical Engineering, 2011, 47(22): 69~73.

    宋勇軍, 王曉南, 徐兆國等. 700MPa級超高強重載汽車車廂板的研制[J], 機械工程學報, 2011,

    47(22): 69~73.

[9]    Li Xiaoyan, Wu Chuansong, Li Wushen. Study on the progress of welding science and technology in China[J], Journal of Mechanical Engineering, 2012, 48(6): 19~30.

    李曉延, 武傳松, 李午申. 中國焊接制造領域?qū)W科發展研究[J], 機械工程學報, 2012, 48(6): 19~30.

[10]Liu Jichang, Li Lijun, Zhu Xiaodong, et al.. Discussion on laser welding combined with other heat resources[J], Laser Technology, 2003, 27(5): 486~489.

    劉繼常, 李力鈞, 朱小東等. 試析幾種激光復合焊接技術[J], 激光技術, 2003, 27(5): 486~489.

[11]S. Katayama, Y. Kawahito, M. Mizutani. Latest progress in performance and understanding of laser welding[J], Physics Procedia, 2012, 39: 8~16.

[12]C. M. Allen. A brief review of recent developments in laser welding processes for ferritic pipe steels[J], Australasian Welding Journal, 2007, 52(4): 21~22.

[13]Steve Shi, David Howse. Laser welding and laser--MAG compound welding of shipbuilding[J], Electric Welding Machine, 2007, 37(6): 32~39.

    石功奇, David Howse. 船用鋼結構的激光焊接以及激光-MAG復合焊接[J], 電焊機, 2007, 37(6): 32~39.

[14]Huang Jian, Gao Zhiguo, Cai Yan, et al.. High power CO₂ laser welding of shipbuilding steel[J], Electric Welding Machine, 2008, 38(3): 7~11.

    黃堅, 高志國, 蔡艷等. 船用鋼板的高功率CO₂激光焊接[J], 電焊機, 2008, 38(3): 7~11.

[15]J.M. Ni, Z.G. Li, J. Huang, et al.. Strengthening behavior analysis of weld metal of laser hybrid welding for microalloyed steel[J], Materials and Design, 2010, 31(8): 4876~4880.

[16]D. Petring, C. Fuhrmann, N. Wolf, et al.. Investigations and applications of laser-arc hybrid welding from thin sheets up to heavy section components[A]. 22nd International Congress on Applications of Lasers and Electro Optics[C]. Congress proceedings, 2003: 1~10.

[17]S.H. Zhang, Y.F. Shen, H.J. Qiu. The technology and welding joint properties of hybrid laser-TIG welding on thick plate[J], Optics & Laser Technology, 2013, 48: 381~388.

[18]Z.J. Liu, M. Kutsuna, L.Q. Sun. CO₂ laser-MAG hybrid welding of 590MPa high strength steel[J], 溶接學會論文集, 2006, 24(1): 17~25.

[19]By C. Roepke, S. Liu. Hybrid Laser arc welding of HY-80 Steel [J], Welding Journal, 2009, 88(Supplementary Issue): 159~167.

[20]By C. Roepke, S. Liu, S. Kelly, et al.. Hybrid laser arc welding process evaluation on DH36 and EH36 steel[J], Welding Journal, 2010, 89: 140~150.

[21]Zeng Xiaoyan, Gao Ming, Yan jun. Effects of shielding gas in laser-arc hybrid welding[J], Chinese Journal of Lasers, 2011, 38(6): 1~7.

    曾曉雁, 高明, 嚴軍. 保護氣體對激光-電弧復合焊接的影響[J], 中國激光, 2011, 38(6): 1~7.

[22]P. Sathiya, M.K. Mishra, R.Soundararajan, et al.. Shielding gas effect on weld characteristics in arc-augmented laser welding process of super austenitic stainless steel[J], Optics & Laser Technology, 2013, 45: 46-55.

[23]G.Tani, G. Campana, A. Fortunato, et al.. The influence of shielding gas in hybrid Laser-MIG welding[J], Applied Surface Science, 2007, 253: 8050~8053.

[24]L.H. Hu, J. Huang, Z.G. Li, et al.. Effects of preheating temperature on cold cracks, microstructures and properties of high power laser hybrid welded 10Ni3CrMoV steel[J], Materials and Design, 2011, 32: 1931~1939.

[25]Hu Peipei, Wang Chunming, Hu Xiyuan. Research progress of fiber laser welding and fiber laser-arc hybrid welding[J], Welding, 2011, 7: 40~45.

   胡佩佩, 王春明, 胡席遠. 光纖激光及其復合焊接研究進展[J], 焊接, 2011, 7: 40~45.

[26]M. Shin, K. Nakata. Single pass full penetration welding of high-tensile steel thick-plate using 4kW fiber laser and MAG arc hybrid welding process[J], 溶接學會論文集, 2009, 27(2): 80-84.

[27]X. Cao, P. Wanjara, J. Huang, et al.. Hybrid fiber laser – Arc welding of thick section high strength low alloy steel[J], Materials and Design, 2011, 32: 3399~3413.

[28]S. Grünenwalda, T. Seefeld, F. Vollertsen. Solutions for joining pipe steels using laser-GMA-hybrid welding processes[J], Physics Procedia, 2010, 5: 77~87.

[29]G. Turichin, E. Valdaytseva, I. Tzibulsky, et al.. Simulation and technology of hybrid welding of thick steel partswith high power fiber laser[J], Physics Procedia, 2011, 12: 646~655.

[30]M. Rethmeier, S. Gook, M. Lammers, et al.. Laser-hybrid welding of thick plates up to 32mm using a 20kW fiber laser[J], Quarterly Journal of the Japan Welding Society, 2009, 27(2): 74~79.

[31]V. Caccese, P.A. Blomquist, K.A. Berube, et al.. Effect of weld geometric profile on fatigue life of cruciform welds made by laser/GMAW processes[J], Marine Structures, 2006, 19: 1~22.

[32]Wang Qiming. Breakthroughs and developments of semiconductor laser in China[J], Chinese Journal of Lasers, 2010, 37(9): 2190~2197.

    王啟明. 中國半導體激光器的歷次突破與發展[J], 中國激光, 2010, 37(9): 2190~2197.

[33]Wang Yonggang, Ma Xiaoyu. The application and present situation of lasers in the automobile industry[J], Journal of Applied Optics, 2004, 25(5): 1-2.

王勇剛, 馬驍宇. 激光在汽車工業中的發展現狀與應用[J]. 應用光學, 2004, 25(5): 1-2.

[34]UWE REISGEN。船舶制造中的激光復合焊[J]. Industrial Laser Solution，2014.10，http://www.industrysourcing.cn/article/302539。